Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/101748
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorBiggs, Mark James-
dc.contributor.advisorAlwahabi, Zeyad T.-
dc.contributor.advisorZhang, Hu-
dc.contributor.authorNavvab Kashani, Seyyed Moein-
dc.date.issued2015-
dc.identifier.urihttp://hdl.handle.net/2440/101748-
dc.description.abstractMicrofluidic systems are of tremendous technological interest as demonstrated by their use in chemical analysis (so called ‘lab-on-a-chip’) and biochemical analysis (e.g. to detect biomarkers for disease), and in process intensification. Packed beds of micro-sized particles possibly utilized for enhancing heat and mass transfer in microfluidic devices, where the flow regime is normally laminar, as well as provide significant increases in surface area per unit volume for analytical chemistry and biochemistry, and for separation and purification. Whilst macro-scale packed beds have long been well understood, the same is not true of their microfluidic counterparts, which we term micro-packed beds or μPBs. Of particular concern is the effect that the small bed-to-particle diameter ratio has on the nature of the bed packing and the hydrodynamics of the flow within them. This lack of understanding stems in part from the challenges that are faced in experimentally assessing μPBs and the flow through to them. The study reported in this thesis addresses these concerns through a two developments. In the first body of work, a new method is proposed for the accurate reconstruction of the structure of a μPB from X-ray micro-computed tomography data for such beds. The porosity obtained from μPB was, within statistical uncertainty, the same as that determined via a direct method whilst use of a commonly used technique yielded a result that was nearly 10% adrift, well beyond the experimental uncertainty. This work particularly addresses the significant issues that arise from the limited spatial resolution of the tomography technique in this context. In the second part of the work reported here, a meshless computational fluid dynamics technique is used to study Newtonian fluid flow through μPBs, including determination of their permeability and the by-pass fraction due to wall effects, which are important in these beds. This use of a CFD allows determination of parameters that are difficult to determine experimentally because of the challenges faced in measuring the small pressure drops involved and the absence of the limited spatial and temporal resolutions of various imaging techniques. The meshless method used here also overcomes the challenges normally faced when seeking to discretise the complex three-dimensional pore space of the packed bed. The developments here open the way to studying more complex μPB configurations, and other processes within them such as non-Newtonian flows and mass and heat transfer.en
dc.subjectmicro-packed bed (μPB)en
dc.subjectporosityen
dc.subjectx-ray microtomographyen
dc.subjectwall effecten
dc.subjectreverse Monte-Carloen
dc.subjectsimulated annealingen
dc.subjectpressure dropen
dc.subjectpermeabilityen
dc.subjectsmoothed particle hydrodynamics (SPH)en
dc.titleExplicit numerical simulation of microfluidic liquid flows in micro-packed beden
dc.typeThesesen
dc.contributor.schoolSchool of Chemical Engineeringen
dc.provenanceThis electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at: http://www.adelaide.edu.au/legalsen
dc.description.dissertationThesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Chemical Engineering, 2015.en
Appears in Collections:Research Theses

Files in This Item:
File Description SizeFormat 
01front.pdf620.87 kBAdobe PDFView/Open
02whole.pdf5.06 MBAdobe PDFView/Open
Permissions
  Restricted Access
Library staff access only921.09 kBAdobe PDFView/Open
Restricted
  Restricted Access
Library staff access only5.32 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.