Please use this identifier to cite or link to this item:
Type: Theses
Title: The effect of the stress regime and pre-existing natural fracture densities, orientations and hydraulic parameters on fracturing stimulation and fluid flow dimension in the Cooper Basin
Author: Ibraheem, Kazeem A.
Issue Date: 2014
School/Discipline: Australian School of Petroleum
Abstract: Fracture stimulation has played a key role in making oil and gas unconventional resources economically viable and has contributed towards domestic energy production. This has (to some extent) been a very similar situation in the Moomba field of the Cooper Basin. In order to further increase the gas fluid flow for commercial production, it is important to understand the stress state and pre-existing natural fracture densities, orientations and hydraulic parameters which are the critical parameters influencing the shale gas production from unconventional reservoirs. Pressure transient tests analysis (to test the reservoir deliverability and stimulation treatment evaluation) conducted on discrete fracture networks (DFN) (generated from image log data) showed that change in diffusivity, storativity, mobility and transmissivity of the reservoir fluid due to the changes in the hydraulic parameters will determine the relative lag time of the fracture radial and linear flow regimes on the pressure derivative plot and the well test speed. This also affected the radius of investigation growth with respect to the fracture boundary. Fracture stimulation was conducted focusing on the effects of geomechanic properties (elastic modulus, fracture size, and shear stress) of unconventional reservoir rocks and controllable fracture stimulation operation parameters (flow rate, pump pressure, and slurry density) on stimulated reservoir volume (SRV) and total percolation area. High elastic modulus (HEM) rock property was found to be the critical parameter affecting this reservoir performance. Further fracture stimulation studies were conducted focusing on the relationship between the controllable fracture stimulation operation parameters and HEM rock property. High flow rate (HQ) or low pump pressure (LPP) was found to be the controllable parameter that would further enhance the gas production from an unconventional reservoir with HEM. This study, therefore, suggests that fracture densities and orientations (fracture distributions) played a major role in the enhancement of SRV and total percolation area. Fracture density improved the connectivity of the stimulated fractures (and hydraulic fractures) for fluid flow and hence the total percolation area. The scenarios that resulted in low SRV and total percolation area were predominantly caused by low fracture density and increased pump pressure and this situation caused a “tip screen-out” effects around the wellbore.
Advisor: Abul Khair, Hani
Dissertation Note: Thesis (M.Sc.(Petrol.Geosc.) -- University of Adelaide, Australian School of Petoleum, 2014.
Keywords: coursework
Description: Title page, abstract and table of contents only. The complete thesis in print form is available from the University of Adelaide Library.
Provenance: Master of Science (Petroleum Geoscience) by coursework
Appears in Collections:Australian School of Petroleum

Files in This Item:
File Description SizeFormat 
09smi14.pdfTitle page, abstract and table of contents only180.31 kBAdobe PDFView/Open
RestrictedArchival - Library staff access only5.75 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.