Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMahamudul, H.en
dc.contributor.authorSilakhori, M.en
dc.contributor.authorHenk Metselaar, I.en
dc.contributor.authorAhmad, S.en
dc.contributor.authorMekhilef, S.en
dc.identifier.citationOptoelectronics and Advanced Materials, Rapid Communications, 2014; 8(11-12):1243-1245en
dc.description.abstractThis work represents an effective design of a temperature regulated PV module by integrating phase change materials for Malaysian weather condition. Through the initial experimental setup it has been shown that if a PCM layer of width 0.02 m of (RT 35) is used as a cooling arrangement with a PV module; the surface temperature of the module is reduced by 10○C, which remains constant for a period of 4-6 hours. This reduction of temperature will definitely increase the conversion efficiency of the module. Experiment and analysis has been carried out considering typical Malaysian weather. Finally, obtained result has been included to evaluate the performance of the prototype.en
dc.description.statementofresponsibilityH. Mahamudul, M. Silakhori, I. Henk Metselaar, S. Ahmad, S. Mekhilefen
dc.publisherNational Institute of Optoelectronicsen
dc.rightsCopyright status unknownen
dc.titleDevelopment of a temperature regulated photovoltaic module using phase change material for Malaysian weather conditionen
dc.typeJournal articleen
pubs.library.collectionMechanical Engineering publicationsen
dc.identifier.orcidSilakhori, M. [0000-0001-6713-1425]en
Appears in Collections:Mechanical Engineering publications

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.