Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/113523
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Engineering of graphene/epoxy nanocomposites with improved distribution of graphene nanosheets for advanced piezo-resistive mechanical sensing
Author: Tung, T.
Karunagaran, R.
Tran, D.
Gao, B.
Nag-Chowdhury, S.
Pillin, I.
Castro, M.
Feller, J.
Losic, D.
Citation: Journal of Materials Chemistry C, 2016; 4(16):3422-3430
Publisher: Royal Society of Chemistry
Issue Date: 2016
ISSN: 2050-7534
2050-7534
Statement of
Responsibility: 
Tran Thanh Tung, Ramesh Karunagaran, Diana N. H. Tran, Boshi Gao, Suvam Nag-Chowdhury, Isabelle Pillin, Mickael Castro, Jean-Francois Feller and Dusan Losic
Abstract: Conductive nanostructured composites combining an epoxy polymer and graphene have been explored for applications such as electrostatic-dissipative, anti-corrosive, and electromagnetic interference (EMI) shielding, stealth composite coating and specifically for sensors. For many of these applications, the limits of dispersion of graphene nanosheets and the interface between fillers and matrices have affected their electrical, structural and mechanical properties. To address these problems, we present the use of a dimethylbenzamide (DMBA)-based hardener to modify the surface of reduced graphene oxide (RGO) and create a 3D architecture with a micro-porous structure. DMBA is applied to provide two functions: one is to act as a stabilizer to avoid restacking of graphene sheets during the reduction process, and the second is to provide a linkage between RGO and epoxy for the formation of homogeneous nanocomposites. Thin films of conductive polymer graphene composites (CPCs) were prepared using a simple doctor blade method, while piezoresistive sensors were prepared by spraying to demonstrate their application for mechanical strain sensing. The electrical properties of the composites as a function of graphene fillers were shown to significantly increase from 1012 Ω sq−1 for neat epoxy to 106 Ω sq−1 for 2 wt% RGO in epoxy composites, while the modulus calculated using nanoindentation exhibited a 43.3% enhancement from 3.56 GPa for epoxy to 6.28 GPa for the composites containing 2 wt% graphene. The results of piezo-resistive performance for mechanical strain sensing under both static and dynamic strain modes showed good sensitivity with a gauge factor (GF) of 12.8 and a fast response time of 20 milliseconds. A minor loading/unloading hysteresis loop after 1000 cycles indicated good reversibility and reproducibility of the sensors. Excellent reproducibility, long-term stability and reliability of the sensing devices are confirmed working without decay of sensitivity after a 6-month exposure to ambient atmosphere. The results obtained suggest that these types of piezo-resistive sensors based on RGO/epoxy CPCs due to their simple, scalable and low cost production could lead to the development of high-performance mechanical strain sensors for a broad range of applications including real-time monitoring, wearable electronics, and structural health monitoring (SHM).
Rights: This journal is © The Royal Society of Chemistry 2016
RMID: 0030048071
DOI: 10.1039/c6tc00607h
Grant ID: http://purl.org/au-research/grants/arc/FT110100711
Appears in Collections:Chemical Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.