Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/118745
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Spatial distribution of micrometre‐scale porosity and permeability across the damage zone of a reverse‐reactivated normal fault in a tight sandstone: insights from the Otway Basin, SE Australia
Author: Debenham, N.
Farrell, N.J.C.
Holford, S.P.
King, R.C.
Healy, D.
Citation: Basin Research, 2019; 31(3):640-658
Publisher: Wiley
Issue Date: 2019
ISSN: 0950-091X
1365-2117
Statement of
Responsibility: 
Natalie Debenham, Natalie J.C. Farrell, Simon P. Holford, Rosalind C. King, David Healy
Abstract: Knowledge of the permeability structure of fault‐bearing reservoir rocks is fundamental for developing robust hydrocarbon exploration and fluid monitoring strategies. Studies often describe the permeability structure of low porosity host rocks that have experienced simple tectonic histories, while investigations of the influence of faults with multiple‐slip histories on the permeability structure of porous clastic rocks are limited. We present results from an integrated petrophysical, microstructural, and mineralogical investigation of the Eumeralla Formation (a tight volcanogenic sandstone) within the hanging wall of the Castle Cove Fault which strikes 30 km NE–SW in the Otway Basin, southeast Australia. This late Jurassic to Cenozoic‐age basin has experienced multiple phases of extension and compression. Core plugs and thin sections oriented relative to the fault plane were sampled from the hanging wall at distances of up to 225 m from the Castle Cove Fault plane. As the fault plane is approached, connected porosities increase by approximately 10% (17% at 225 m to 24% at 0.5 m) and permeabilities increase by two orders of magnitude (from 0.04 mD at 225 m to 1.26 mD at 0.5 m). Backscattered Scanning Electron Microscope analysis shows that microstructural changes due to faulting have enhanced the micrometre‐scale permeability structure of the Eumeralla Formation. These microstructural changes have been attributed to the formation of microfractures and destruction of original pore‐lining chlorite morphology as a result of fault deformation. Complex deformation, i.e. formation of macrofractures, variably oriented microfractures, and a hanging wall anticline, associated with normal faulting and subsequent reverse faulting, has significantly influenced the off‐fault fluid flow properties of the protolith. However, despite enhancement of the host rock permeability structure, the Eumeralla Formation at Castle Cove is still considered a tight sandstone. Our study shows that high‐resolution integrated analyses of the host rock are critical for describing the micrometre‐scale permeability structure of reservoir rocks with high porosities, low permeabilities, and abundant clays that have experienced complex deformation.
Keywords: Otway Basin; permeability; porosity; reverse‐reactivated normal fault
Rights: © 2019 The Authors. Basin Research published by International Association of Sedimentologists and European Association of Geoscientists and Engineers and John Wiley & Sons Ltd This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
DOI: 10.1111/bre.12345
Grant ID: http://purl.org/au-research/grants/arc/DP160101158
Published version: http://dx.doi.org/10.1111/bre.12345
Appears in Collections:Aurora harvest 8
Australian School of Petroleum publications

Files in This Item:
File Description SizeFormat 
hdl_118745.pdfPublished version3.45 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.