Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorArjomandi, Maziar-
dc.contributor.authorDerakhshandeh, Javad Farrokhi-
dc.description.abstractIn this dissertation, the application of Vortex-Induced Vibration (VIV) and Wake-Induced Vibration (WIV) of a bluff body for harnessing the kinetic energy of a fluid flow is presented. The application of induced vibration due to vortices in harnessing hydrokinetic energy of the fluid is relatively immature and this research work, which is written as a compilation of journal articles, attempts to address major scientific and technological gaps in this field. The project spans both VIV and WIV, with a particular attention to the development of a better understanding of the wake behaviour in a tandem configuration and the effect of boundary layers for harnessing the kinetic energy of the flow. Accordingly, two separate coupled test cases of tandem bodies comprising Coupled Circular-Cylinder (CCC) and Coupled Cylinder-Airfoil (CCA) configurations were proposed and investigated. In the first series of tests on the CCC, two circular cylinders were employed to investigate the unsteady wake interactions on the energy yield. The upstream cylinder was fixed, while the downstream one was mounted on a virtual elastic base with one degree of freedom. The virtual elastic system consisted of a motor and a controller, a belt-pulley transmission and a carriage. In the CCC, the influence of the Reynolds number, gap between cylinders and boundary layers on the dynamic response of the downstream cylinder were numerically and experimentally investigated. In a numerical analyse of the system, a dynamic mesh technique within the ANSYS Fluent package was utilized to simulate the dynamic response of the cylinder. The experimental tests confirmed the numerical outcomes and demonstrated that in the WIV mechanisms, a positive kinetic energy transfer from fluid flow to the cylinder was achieved. It is also observed that the dynamic response of the cylinder under the WIV mechanism differs from the dynamic response of VIV. In addition, both numerical and experimental results indicated that a staggered arrangement with 3.5 ≤ x₀/D ≤ 4.5 and 1 ≤ y₀/D ≤ 2 (here, D is the diameter of the cylinder, and x₀ and y₀ are the horizontal and vertical offsets, respectively) is the optimum arrangement among all test cases to harness the energy of vortices, resulting in a power coefficient of 28%. This was achieved due to the favourable phase lag between the velocity of the cylinder and force imposed by the fluid. The results revealed that for the staggered arrangement of the cylinders, the WIV responses can occur at frequencies outside the range in which VIV is observed. In the second series of tests utilizing a CCA, the downstream circular cylinder was replaced by a symmetric airfoil with two degrees of freedom; heave and pitch. The heave degree of freedom employed the same virtual elastic base used for the CCC experiments. The pitch angle of the foil was actively controlled, as opposed to using passive mechanical impedance, since this enables full control over the foil behaviour, thereby facilitating the adjustment of the angle of attack accurately and rapidly. The results of CCA show that both longitudinal and lateral distances play an important role in the Strouhal number, power density and, consequently, the heave response of the airfoil. In addition, it was shown that the circulation of the vortices was influenced by the gap spacing between the cylinder and the airfoil. Furthermore, it was found that an optimum angle of attack of α = 10° is the most efficient for harnessing the energy of vortices with a maximum power coefficient of 30% for cases with 3.5 ≤ x₀/D ≤ 4.5 and 1 ≤ y₀/D ≤ 1.5 arrangements. Such a range is narrower laterally when compared with the optimum arrangement of the CCC. This work provided the foundation for further work to utilize the potential of this technology and further explore the opportunity to harness the vortical power in shallow water and ocean currentsen
dc.subjectVortex-induced vibrationen
dc.subjectwake-induced vibrationen
dc.subjecthydrokinetic energyen
dc.subjectvortex sheddingen
dc.subjectbluff bodiesen
dc.titleHarnessing Hydrokinetic Energy from Vortex-Induced Vibration (VIV)en
dc.contributor.schoolSchool of Mechanical Engineeringen
dc.provenanceThis electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at:
dc.description.dissertationThesis (Ph.D.) -- University of Adelaide, School of Mechanical Engineering, 2015en
Appears in Collections:Research Theses

Files in This Item:
File Description SizeFormat 
Derakhshandeh2015_PhD.pdf8.58 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.