Please use this identifier to cite or link to this item:
Scopus Web of Science® Altmetric
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTuly, S.S.-
dc.contributor.authorSaha, M.-
dc.contributor.authorMustafi, N.N.-
dc.contributor.authorSarker, M.R.I.-
dc.identifier.citationAIP Conference Proceedings, 2017, vol.1851, pp.020030-1-020030-6-
dc.description.abstractBiodiesel has been identified as an alternative and promising fuel source to reduce the dependency on conventional fossil fuel in particular diesel. In this work, waste cooking oil (WCO) of restaurants is considered to produce biodiesel. A wellestablished transesterification reaction by sodium hydroxide (NaOH) catalytic and supercritical methanol (CH3OH) methods are applied to obtain biodiesel. In the catalytic transesterification process, biodiesel and glycerine are simultaneously produced. The impact of temperature, methanol/WCO molar ratio and sodium hydroxide concentration on the biodiesel formation were analysed and presented. It was found that the optimum 95% of biodiesel was obtained when methanol/WCO molar ratio was 1:6 under 873 K temperature with the presence of 0.2% NaOH as a catalyst. The waste cooking oil blend proportions were 10%, 15%, 20% and 25% and named as bio-diesel blends B-10, B-15, B-20, and B-25, respectively. Quality of biodiesel was examined according to ASTM 6751: biodiesel standards and testing methods. Important fuel properties of biodiesel, such as heating value, cetane index, viscosity, and others were also investigated. A four-stroke single cylinder naturally aspirated DI diesel engine was operated using in both pure form and as a diesel blend to evaluate the combustion and emission characteristics of biodiesel. Engine performance is examined by measuring brake specific fuel consumption and fuel conversion efficiency. The emission of carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxides (NOx), and others were measured. It was measured that the amount of CO2 increases and CO decreases both for pure diesel and biodiesel blends with increasing engine load. However, for same load, a higher emission of CO2 from biodiesel blends was recorded than pure diesel.-
dc.description.statementofresponsibilityS. S. Tuly, M. Saha, N. N. Mustafi, M. R. I. Sarker-
dc.publisherAmerican Institute of Physics-
dc.relation.ispartofseriesAIP Conference Proceedings; 1851-
dc.rights© 2017 Author(s). Published by AIP Publishing.-
dc.subjectBiodiesel; Waste cooking oil; Transesterification; Diesel-biodiesel blend-
dc.titleProduction and application of biodiesel from waste cooking oil-
dc.typeConference paper-
dc.contributor.conferenceBangladesh Society of Mechanical Engineers International Conference on Thermal engineering (BSME ICTE) (22 Dec 2016 - 24 Dec 2016 : Dhake, Bangladesh)-
dc.identifier.orcidSaha, M. [0000-0002-9169-5033]-
Appears in Collections:Aurora harvest 4
Mechanical Engineering conference papers

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.