Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/58383
Citations
Scopus Web of Science® Altmetric
?
?
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShahin, M.-
dc.contributor.authorJaksa, M.-
dc.date.issued2009-
dc.identifier.citationProceedings of Selected Sessions of the 2009 International Foundation Congress and Equipment Expo; pp.26-33-
dc.identifier.isbn9780784410226-
dc.identifier.issn0895-0563-
dc.identifier.urihttp://hdl.handle.net/2440/58383-
dc.descriptionAlso cited as: Contemporary Topics in In Situ Testing, Analysis, and Reliability of Foundations - Proceedings of Selected Sessions of the 2009 International Foundation Congress and Equipment Expo / Magued Iskander, Debra F. Laefer, Mohamad H. Hussein (eds.): pp.26-33-
dc.description.abstractIn the last few decades, numerous methods have been developed for predicting the axial capacity of drilled shafts. Among the available methods, the cone penetration test (CPT) based models have been shown to give better predictions in many situations. This can be attributed to the fact that CPT-based methods have been developed in accordance with the results of the CPT tests, which have been found to yield more reliable soil properties, hence, more accurate axial capacity predictions of drilled shafts. In this paper, one of the most commonly used artificial intelligence techniques, i.e. artificial neural networks (ANNs), was utilized in an attempt to obtain more accurate axial capacity predictions for drilled shafts. The ANN model was developed using data collected from the literature that comprise CPT results and drilled shaft load tests of 94 case records. The predictions from the ANN model were compared with those obtained from three commonly used available CPT-basedmethods. The results indicate that the ANN-based model provides more accurate axial capacity predictions of drilled shafts and outperforms the availableconventional methods. Copyright ASCE 2009.-
dc.description.statementofresponsibilityMohamed A. Shahin and Mark B. Jaksa-
dc.language.isoen-
dc.publisherASCE-
dc.rights©2009 ASCE-
dc.source.urihttp://dx.doi.org/10.1061/41022(336)4-
dc.titleIntelligent computing for predicting axial capacity of drilled shafts-
dc.typeConference paper-
dc.contributor.conferenceInternational Foundation Congress and Equipment Expo (2009 : Orlando, Florida)-
dc.identifier.doi10.1061/41022(336)4-
dc.publisher.placeUSA-
pubs.publication-statusPublished-
dc.identifier.orcidJaksa, M. [0000-0003-3756-2915]-
Appears in Collections:Aurora harvest 5
Civil and Environmental Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.