Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/60611
Citations
Scopus Web of Science® Altmetric
?
?
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWillis, C.-
dc.contributor.authorYang, Q.-
dc.contributor.authorSeracino, R.-
dc.contributor.authorGriffith, M.-
dc.date.issued2009-
dc.identifier.citationEngineering Structures, 2009; 31(11):2580-2587-
dc.identifier.issn0141-0296-
dc.identifier.issn1873-7323-
dc.identifier.urihttp://hdl.handle.net/2440/60611-
dc.description.abstractThe out-of-plane bending and in-plane shear response of unreinforced modern clay brick masonry walls retrofitted with fibre-reinforced polymer (FRP) strips is often governed by debonding failure mechanisms. Hence, it is necessary to quantify the fundamental interface bond-slip model, which describes the debonding behaviour of the FRP-to-masonry interface. This paper presents the results of a series of 29 pull tests investigating the use of externally bonded (EB) and near surface mounted (NSM) retrofitting techniques. Test variables included: surface preparation; geometric properties; location of FRP (relative to perpend joints and cores); bonding agent of bed joints (mortar and quick drying paste); bonding method for glass fibre sheets (plate bonding and dry lay-up); and FRP material. A discussion of the test results and preliminary practical recommendations are also provided. A model used to predict the intermediate crack debonding resistance was verified against the test data. The model is generic in that it is applicable to both the EB and NSM retrofitting techniques. This generic model was shown to give very good ultimate strength predictions for the series of 29 pull tests conducted as part of this research. © 2009 Elsevier Ltd. All rights reserved.-
dc.description.statementofresponsibilityC.R. Willis, Q. Yang, R. Seracino and M.C. Griffith-
dc.language.isoen-
dc.publisherElsevier Sci Ltd-
dc.rightsCopyright © 2009 Elsevier Ltd. All rights reserved.-
dc.source.urihttp://dx.doi.org/10.1016/j.engstruct.2009.06.006-
dc.subjectIntermediate crack debonding-
dc.subjectExternally bonded-
dc.subjectNear surface mounted-
dc.subjectPull test-
dc.subjectUnreinforced masonry-
dc.subjectFibre-reinforced polymer-
dc.titleBond behaviour of FRP-to-clay brick masonry joints-
dc.typeJournal article-
dc.identifier.doi10.1016/j.engstruct.2009.06.006-
dc.relation.granthttp://purl.org/au-research/grants/arc/DP0559706-
dc.relation.granthttp://purl.org/au-research/grants/arc/DP0559706-
pubs.publication-statusPublished-
dc.identifier.orcidGriffith, M. [0000-0001-9010-3764]-
Appears in Collections:Aurora harvest 5
Civil and Environmental Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.