Please use this identifier to cite or link to this item:
|Title:||Statistical estimation of turbulent trailing edge noise|
Albarracin Gonzalez, C.
|Citation:||Proceedings of the 20th International Congress on Acoustics (ICA 2010), held in Sydney, New South Wales 23-27 August 2010 / M. Burgess, J. Davey, C. Don and T. McMinn (ed.): 9 p.|
|Publisher:||Australian Acoustical Society|
|Conference Name:||International Congress on Acoustics (ICA) (20th : 2010 : Sydney, New South Wales)|
|C. J. Doolan, C. Albarracin Gonzalez and C. H. Hansen|
|Abstract:||The efficient computation of turbulent airfoil trailing edge noise is important for the cost-effective design of fixed and rotary-wing aircraft, wind turbines, fans and submarines. Recently, the computation of trailing edge noise has mainly been attempted using either direct or hybrid methods of computational aeroacoustics (CAA). However, many of these approaches rely on expensive transient flow solution methods for acoustic source term calculation, such as direct numerical simulation (DNS) or large eddy simulation (LES), which aren't appropriate for engineering design purposes. This paper will present a new approach for calculating turbulent trailing edge noise. Instead of using DNS or LES for a flow solution, the method uses mean flow solutions (Reynolds Averaged Navier Stokes or RANS) and a statistical model to calculate acoustic source terms and radiated far-field noise. After the method is presented, results showing the noise generated by the passage of turbulent flow past a sharp edged flat plate will be shown. For the purposes of validation, the model will use mean flow data from both DNS and RANS solutions to calculate the acoustic source terms. Simulated noise will then be compared with an empirical model of flat-plate trailing edge noise. The paper will conclude with remarks on the accuracy of the method and a discussion of future test cases required to test its validity in more challenging flow conditions.|
|Rights:||© Australian Acoustical Society, NSW Division, 2010. The proceedings of ICA 2010 have been reproduced from author-submitted files. The authors are solely responsible for the technical content and opinions expressed therein. The opinions expressed are not necessarily those of the International Commission for Acoustics or the Australian Acoustical Society. Permission is granted for any person to reproduce a part of any paper provided that the permission is obtained from the author(s) and credit is given to the author(s) and these conference proceedings|
|Appears in Collections:||Aurora harvest|
Environment Institute publications
Mechanical Engineering publications
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.