Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/65612
Citations
Scopus Web of Science® Altmetric
?
?
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLashkari, O.-
dc.contributor.authorNafisi, S.-
dc.contributor.authorLanglais, J.-
dc.contributor.authorGhomashchi, R.-
dc.date.issued2007-
dc.identifier.citationJournal of Materials Processing Technology, 2007; 182(1-3):95-100-
dc.identifier.issn0924-0136-
dc.identifier.issn1873-4774-
dc.identifier.urihttp://hdl.handle.net/2440/65612-
dc.description.abstractLiquid enrichment was studied for hypoeutectic Al-7% Si alloys using a new innovative process. A portion of the residual liquid within the semisolid state was decanted and the chemical composition of the decanted billet and liquid was investigated by the spectroscopic analysis. The measured silicon content of the decanted Al-Si binary alloy is in good agreement with the theoretical calculations. For commercial 356 alloy, a multi-component alloy system, the calculated Si content showed about ∼2-3% difference to that of the experimental trials. The Si, Mg, and Fe contents in the drained liquid were always higher than the cast piece; a clear indication of segregation of these elements within the last liquid. For Ti however, the trend was reversed and the reduced Ti% in the decanted liquid was attributed to the peritectic reaction and the presence of Ti-based intermetallics as the nucleation sites for the formation of the primary α-Al within the mush. The comparison of the chemical compositions of the cast pieces and drainages with those of the standard value indicated that even with 15% drainage, the composition of the alloy is still within the targeted range, i.e. standard value. Consequently, the billets so produced are appropriate feedstock and the remaining scrap is fully recyclable. © 2006 Elsevier B.V. All rights reserved.-
dc.description.statementofresponsibilityO. Lashkari, S. Nafisi, J. Langlais, R. Ghomashchi-
dc.language.isoen-
dc.publisherElsevier Science Sa-
dc.rights© 2006 Elsevier B.V. All rights reserved.-
dc.source.urihttp://dx.doi.org/10.1016/j.jmatprotec.2006.06.021-
dc.subjectSemi-solid–metal-
dc.subjectAl–Si alloys-
dc.subjectLiquid drainage-
dc.subjectSegregation-
dc.subjectFraction solid-
dc.titleThe effect of partial decanting on the chemical composition of semi-solid hypo-eutectic Al-Si alloys during solidification-
dc.typeJournal article-
dc.identifier.doi10.1016/j.jmatprotec.2006.06.021-
pubs.publication-statusPublished-
dc.identifier.orcidGhomashchi, R. [0000-0003-3633-2296]-
Appears in Collections:Aurora harvest
Materials Research Group publications
Mechanical Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.