Please use this identifier to cite or link to this item:
|Title:||Analysis of the direct shear failure mode for elastic structural member under external blasts|
|Citation:||ACUN-6 International Composites Conference: Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure, held in Melbourne, 14-16 November, 2012 / Y. Bai, S. Bandyopadhyay, X.-L. Zhao, R. Singh and S. Rizkalla, pp.193-198|
|Conference Name:||International Composites Conference (6th : 2012 : Melbourne, Victoria)|
|J. Xu and C. Wu|
|Abstract:||Pressure impulse (PI) diagrams have widely been used for preliminary design of structural numbers against blast loads. Considerable research has been conducted to derive PI diagrams for flexure modes of structural members using single-degree-of-freedom (SDOF) systems. However, little research has been done for derivation of PI diagrams for structural members against shear failure. In this SDOF theory is used to investigate the shear response of elastic structural members under external loads. Theoretical solutions of shear response of elastic structural members resulted from the external explosions are derived using the SDOF approach. These solutions are then used to generate a family of P-I curves based on the shear resistance capability of the structural members to withstand the explosions. Pressure-impulse diagrams are also generated to distinguish the failure of the RC slab dominated by the directs shear or flexure force.|
|Rights:||Copyright © ACUN - The 6th International Composites Conference 2012|
|Appears in Collections:||Aurora harvest|
Civil and Environmental Engineering publications
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.