Browsing "Materials Research Group publications" by By Date

Jump to a point in the index:
Showing results 1 to 20 of 222  next >
PreviewIssue DateTitleAuthor(s)
2013Architectural design of diamond-like carbon coatings for long-lasting joint replacementsLiu, Y.; Zhao, X.; Zhang, L.; Habibi, D.; Xie, Z.
2013Characterizing water sorption in 100% solids epoxy coatingsConiglio, N.; Nguyen, K.; Kurji, R.; Gamboa, E.
2013Hydrothermal ageing of X65 steel specimens coated with 100% solids epoxyGamboa, E.; Coniglio, N.; Kurji, R.; Callar, G.
2013Extremely hard, damage-tolerant ceramic coatings with functionally graded, periodically varying architectureWo, P.; Zhao, X.; Munroe, P.; Zhou, Z.; Li, K.; Habibi, D.; Xie, Z.
2012Effects of irradiation and non-enzymatic glycation on the fracture resistance of bovine cortical boneFletcher, L.; Codrington, J.; Parkinson, I.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012The economics of applying internal coatings to pump casingsWong, A.; Vince, P.; Gamboa, E.; Annual Conference of the Australasian Corrosion Association (2012 : Melbourne, Victoria)
2012Microstructure and high temperature wear of the aluminum matrix composites fabricated by reaction from Al-ZrO₂-B elemental powdersZhu, H.; Jia, C.; Li, J.; Zhao, J.; Song, J.; Yao, Y.; Xie, Z.
2012Nanocomposite bilayer film for resisting wear and corrosion damage of a Ti-6Al-4V alloyXu, J.; Liu, L.; Xie, Z.; Munroe, P.
2012Enhanced corrosion-resistance in nanocrystalline MoSi₂ films enabled by Cr additionsXu, J.; Lai, D.; Wu, J.; Xie, Z.; Munroe, P.
2012Reaction pathways, activation energies and mechanical properties of hybridcomposites synthesized in-situ from Al-TiO₂-C powder mixturesZhu, H.; Jiang, Y.; Yao, Y.; Song, J.; Li, J.; Xie, Z.
2012A critical role for Al in regulating the corrosion resistance of nanocrystalline Mo(Si₁₋ₓAlₓ)₂ filmsXu, J.; Lai, D.; Xie, Z.; Munroe, P.; Jiang, Z.
2012Mechanical characterization of a novel nanocrystalline coating: first-principles calculations and nanoindentationLai, D.; Xu, J.; Xie, Z.; Habibi, D.; Munroe, P.
2012Investigation on effect of alloying elements on mechanical properties of MoSi₂ by first principle calculationXu, J.; Wu, J.; Lai, D.; Xie, Z.; Munroe, P.
2012In situ synthesis and characterization of a hierarchically structured Al₂0₃/Al₃Ti compositeZhu, H.; Jiang, Y.; Song, J.; Li, J.; Munroe, P.; Xie, Z.
2012Corrosion- and damage-resistant nitride coatings for steelAhmed, M.; Munroe, P.; Jiang, Z.; Zhao, X.; Wajrak, M.; Guo, H.; Rickard, W.; Xie, Z.
2012Failure strength of human vertebrae: prediction using bone mineral density measured by DXA and bone volume by micro-CTPerilli, E.; Briggs, A.; Kantor, S.; Codrington, J.; Wark, J.; Parkinson, I.; Fazzalari, N.
2012Nondestructive and quantitative evaluation of wire rope based on radial basis function neural network using eddy current inspectionCao, Q.; Liu, D.; He, Y.; Zhou, J.; Codrington, J.
2012High temperature dry sliding friction and wear behavior of aluminum matrix composites (Al₃Zr+α-Al₂O₃)/AlZhu, H.; Jar, C.; Song, J.; Zhao, J.; Li, J.; Xie, Z.
2012Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loadingBerto, F.; Lazzarin, P.; Kotooussov, A.; Pook, L.
2012On the non singular higher order terms in bi-dimensional and three-dimensional engineering applicationsBerto, F.; Lazzarin, P.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)