Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/79130
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Derivation of normalized pressure impulse curves for flexural ultra high performance concrete slabs
Author: Dragos, J.
Wu, C.
Haskett, M.
Oehlers, D.
Citation: Journal of Structural Engineering-ASCE, 2013; 139(6):875-885
Publisher: ASCE-Amer Soc Civil Engineers
Issue Date: 2013
ISSN: 0733-9445
1943-541X
Statement of
Responsibility: 
Jonathon Dragos; Chengqing Wu; Matthew Haskett; and Deric Oehlers
Abstract: In previous studies, a finite-difference procedure was developed to analyze the dynamic response of simply supported normal reinforced concrete (NRC) slabs under blast loads. Ultra high performance concrete (UHPC) is a relatively new material with high strength and high deformation capacity in comparison with conventional normal strength concrete. Therefore, the finite-difference procedure for analysis of conventional reinforced concrete members against blast loads needs to be significantly adapted and extended to accommodate UHPC. In this paper, an advanced moment-rotation analysis model, employed to simulate the behavior of the plastic hinge of an UHPC member, is incorporated into the finite-difference procedure for the dynamic response analysis of reinforced UHPC slabs under blast loads. The accuracy of the finite-difference analysis model that utilized the moment-rotation analysis technique was validated using results from blast tests conducted on UHPC slabs. The validated finite-difference model was then used to generate pressure impulse (PI) curves. Parametric studies were then conducted to investigate the effects of various sectional and member properties on PI curves. Based on the simulated results, two equations were derived that can be used to normalize a PI curve. Further numerical testing of the normalization equations for UHPC members was then undertaken. The generated normalized PI curve, accompanied by the derived normalization equations, can be used for the purposes of general UHPC blast design.
Keywords: UHPC; Blast loading; Dynamic analysis; Pressure impulse diagram
Rights: © 2013 American Society of Civil Engineers.
RMID: 0020128749
DOI: 10.1061/(ASCE)ST.1943-541X.0000733
Appears in Collections:Civil and Environmental Engineering publications

Files in This Item:
File Description SizeFormat 
hdl_79130.pdfAccepted version911.13 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.