Modelling of formation of stock surface and subsurface layers in breakdown rolling of aluminium alloy
Date
2007
Authors
Krzyzanowski, M.
Frolish, M.
Rainforth, W.
Beynon, J.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Computer Methods in Materials Science, 2007; 7(1):88-93
Statement of Responsibility
Michal Krzyzanowski, Michael F. Frolish, W. Mark Rainforth, John H. Beynon
Conference Name
Abstract
Simulations of the reheating and breakdown rolling of the Al-Mg-Mn aluminium alloy AA3104 carried out using a two-high laboratory mill were supported by detailed numerical modelling of the stock surface layer formation. The model of the stock/roll interface is usually a micro-part of a more complex macro-finite-element model. Corresponding linking of modelling scales is a necessary stage for numerical analysis of fine mechanisms of the interface formation. This procedure allows for consideration of the fine mechanisms responsible for formation of the scale/metal interface while, at the same time, reducing the number of elements under consideration. It has been shown that a small amount of Mg (as oxides) was intermixed into the subsurface layer of a few microns depth by deformation during rolling. The mechanisms which led to the deformation and mixing of the oxide particles into the subsurface layer arose from slip at the roll/stock interface and the action of roll surface asperities on the stock surface.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright status unknown