Epoxy/graphene film for lifecycle self-sensing and multifunctional applications
Files
(Published version)
Date
2020
Authors
Han, S.
Meng, Q.
Xing, K.
Araby, S.
Yu, Y.
Mouritz, A.
Ma, J.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Composites Science And Technology, 2020; 198(108312):1-10
Statement of Responsibility
Conference Name
Abstract
Graphene holds promise to provide polymers with multifunctionality such as electrical conductivity. However, pristine graphene is not processable in solvent and graphene oxide even after reduction lacks sufficient electrical conductivity and compatibility with polymers. This work reported an epoxy/graphene nanocomposite film that was synthesized by a facile approach, taking advantage of unique solution-processable graphene platelets (GnPs) that had high structural integrity as reflected by electrical conductivity of 1460 S/cm. A percolation threshold of electrical conductivity was found to be 0.63 vol% for the film. GnPs at 2 vol% improved the thermal conductivity and Young's modulus of epoxy by 117% and 101%, respectively. The film was then investigated as a multifunctional sensor. It can real-time monitor its lifecycle structure health, i.e. the measurement of not only curing parameters but the initiation, localization and evolution of damages spanning from curing to the end of service life. Being sensitive to ambient environmental temperature, the film was investigated as a thermal sensor. Its performance as a strain sensor proved satisfactory through a 20,000-cyclic fatigue test. The film not only self-sensed damage such as cracks but mapped out the corresponding locations. This methodology could lead to the development of cost-effective, high-performance sensors for life-cycle, self-sensing health monitoring for various bonding structures
School/Discipline
Dissertation Note
Provenance
Description
Data source: Supplementary data, https://doi.org/10.1016/j.compscitech.2020.108312
Access Status
Rights
Copyright 2020 Elsevier
Access Condition Notes: Accepted manuscript available from 1 July 2022