The Influence of Cup Orientation on the Primary Fixation of a Hemispherical Cementless Acetabular Cup: A Cohort Based Finite Element Study

Files

hdl_146791.pdf (1.02 MB)
  (Published version)

Date

2025

Authors

Taylor, M.
Callary, S.
Thewlis, D.
Bryan, R.

Editors

Advisors

Journal Title

Journal ISSN

Volume Title

Type:

Journal article

Citation

Journal of Orthopaedic Research, 2025; 43(7):1293-1302

Statement of Responsibility

Mark Taylor, Stuart Callary, Dominic Thewlis, Rebecca Bryan

Conference Name

Abstract

Cup orientation has been investigated in detail with respect to risk of dislocation, however, the impact on the primary fixation of cementless cups is poorly understood. The aim of this study was to assess the influence acetabular component orientation on the primary fixation of cementless acetabular cups using an in silico clinical trial framework. Finite element models of 57 implanted hemi-pelves were generated from CT scans of a cohort of end stage osteoarthritis patients. Each hemi-pelvis was implanted with the with cup orientations that bounded the Lewinnek safe zone (mechanical alignment +/-10 degrees) and an approximation of the extreme orientations reported in the literature (mechanical alignment +/-20 degrees). Bone strain immediately adjacent to the implant and micromotions (gap and shear micromotions) were used to assess primary fixation. Analysis was performed at the levels of the individual subjects and the entire cohort. There was minimal variation in all metrics within the Lewinnek safe zone. Micromotion, particularly inferior gaping, was more sensitive to cup orientation than peri-prosthetic bone strain, tending to increase with inclination angle. Both the peri-prosthetic bone strains and micromotions were moderately correlated to the average bone modulus. Individuals with low bone modulus were shown to be more sensitive to changes in cup orientation for both peri-prosthetic bone strains and micromotions both within and outside the Lewinnek safe zone. This suggests that assessing bone quality should be routinely incorporated into the planning process, particularly when considering cup orientations outside of the Lewinnek safe zone.

School/Discipline

Dissertation Note

Provenance

Description

Access Status

Rights

© 2025 The Author(s). Journal of Orthopaedic Research ® published by Wiley Periodicals LLC on behalf of Orthopaedic Research Society. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

License

Call number

Persistent link to this record