Fine-tuning the surface of forward osmosis membranes via grafting graphene oxide: performance patterns and biofouling propensity
Date
2015
Authors
Hegab, H.M.
ElMekawy, A.
Barclay, T.G.
Michelmore, A.
Zou, L.
Saint, C.P.
Ginic Markovic, M.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
ACS applied materials & interfaces, 2015; 7(32):18004-18016
Statement of Responsibility
Conference Name
Abstract
Graphene oxide (GO) nanosheets were attached to the polyamide selective layer of thin film composite (TFC) forward osmosis (FO) membranes through a poly L-Lysine (PLL) intermediary using either layer-by-layer or hybrid (H) grafting strategies. Fourier transform infrared spectroscopy, zeta potential, and thermogravimetric analysis confirmed the successful attachment of GO/PLL, the surface modification enhancing both the hydrophilicity and smoothness of the membrane’s surface demonstrated by water contact angle, atomic force microscopy, and transmission electron microscopy. The biofouling resistance of the FO membranes determined using an adenosine triphosphate bioluminescence test showed a 99% reduction in surviving bacteria for GO/PLL-H modified membranes compared to pristine membrane. This antibiofouling property of the GO/PLL-H modified membrane was reflected in reduced flux decline compared to all other samples when filtering brackish water under biofouling conditions. Further, the high density and tightly bound GO nanosheets using the hybrid modification reduced the reverse solute flux compared to the pristine, which reflects improved membrane selectivity. These results illustrate that the GO/PLL-H modification is a valuable addition to improve the performance of FO TFC membranes.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright 2015 American Chemical Society