Influence of aeration and permeate flux on deposition of particulates on membrane surface
Date
2010
Authors
Aryal, R.
Vigneswaran, S.
Kandasamy, J.
Baral, B.
Grasmick, A.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Water Supply, 2010; 10(6):979-986
Statement of Responsibility
Conference Name
Abstract
In microfiltration, a deposit of foulant tends to form on the membrane surface and this usually controls the performance of the filtration process. This paper discusses the influence of physical parameters such as aeration and permeates flux on migration and deposition of above micron particles on the membrane surface. Kaolin clay suspension of particle 3.7–8 mm with mean particle diameter 4.1 mm was used in this study. Equal amount of mass of deposited particles on the membrane surface created different transmembrane pressure (TMP) when operated at different aeration rates and permeate flux showing that there is a composite effect. The particle deposition rate at the beginning at lower flux was almost linear which changed to a sharp logarithamic rise at higher flux. The difference in TMP rise for the same amount of deposit demonstrated the selective nature of particle deposition. The mass of the particle deposition on the membrane surface could be described by two parameters: maximum deposition and time using a simple empirical logarithamic equation y=k/[1+exp(b-at)], where k, a, and b are constant; y is the particulate mass deposit (g/m2) and t is the time. The maximum particle mass deposition growth could be described by the equation dy/dt=1/4ka.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright 2010 IWA Publishing