2026-09-21T16:42:01Zhttps://digital.library.adelaide.edu.au/server/oai/request

oai:digital.library.adelaide.edu.au:2440/1098042026-06-12T08:31:08Zcom_2440_14759col_2440_14760

Ng, Alex Ching-Tai Sheikh, Abdul Hamid Ozbakkaloglu, Togay He, Shuai School of Civil, Environmental and Mining Engineering 2017 http://hdl.handle.net/2440/109804 10.4225/55/5a1f7c0eb3fbc This thesis contains a series of journal papers focused on the development of the model-based approach for damage identification using guided waves. The proposed approach requires no baseline data. It can identify multiple damages such as characterising the number, location and the size of cracks in isotropic beams and delaminations in composite beams efficiently and accurately with quantifying the associated uncertainties using linear guided waves. It also investigate the plausibility of using the nonlinear guided wave for damage identification. Based on the modelling ability, this approach is able to extend to different kinds of structures with various types of damages. In utilising the linear guided wave for damage detection, the efficient spectral finite element (SFE) method is used to simulate the guided wave propagation in beams for both isotropic and composite materials. An SFE crack element is developed to simulate crack-wave interaction and the guided wave mode-conversion effect resulted from an asymmetric open crack in the isotropic beam. The delamination is simulated by duplicated the nodes of SFE elements in the delaminated regions. The proposed SFE model is verified using three-dimensional (3D) finite element (FE) method and good agreements are found in the results. Stochastic methods are applied for the proposed model-based approach in the identification of multiple damages. The Bayesian model class selection algorithm is employed to determine the number of damages. The Bayesian model updating method implemented with efficient transitional Markov Chain Monte Carlo (TMCMC) sampler is proposed to identify the location and size of the crack. The Bayesian updating with structural reliability method (BUS) using the efficient and robust algorithm, Subset simulation, is proposed to identify the location, delaminated layer and length of the delaminations. The uncertainties of the identification are provided. For validation, the proposed methods are experimentally executed using Laser vibrometre and good agreements are obtained in the results. The proposed SFE model is extended to simulate the nonlinear guided waves resulted from both classical and contact nonlinearity. Numerical case studies and parametric study highlight the potential of the SFE model in simulating nonlinear guided waves. This suggests that the model-based approach employed the nonlinear feature of guided waves to identify damages in further research. Thesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Civil, Environmental and Mining Engineering, 2017. guided wave damage identification Bayesian TMCMC subset contact crack delamination material nonlinearity geometric nonlinearity Research by Publication Spectral finite element modelling and damage identification of beam-like structures using linear and nonlinear guided waves Theses This electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at: http://www.adelaide.edu.au/legalsopen.access