Mohamed Sadakkathulla, M.Oehlers, D.Bradford, M.2006-06-192006-06-192002Advances in Structural Engineering: an international journal, 2002; 5(4):223-2301369-43322048-4011http://hdl.handle.net/2440/911© 2002 Multi-Science Publishing<jats:p> Steel and FRP plating reinforced concrete structures is increasingly being used for retrofitting. Plates can be bonded to any surface of a beam or slab, although it is common practice to adhesively bond plates to the tension faces. The addition of these tension face plates reduces the sectional ductility of the beam. Furthermore, these tension face plates are prone to premature debonding because the stress concentrations induced by these plates overlap with those induced by the tension reinforcing bars adjacent to the plate. Solutions to these two problems, which are the subject of this paper, consist of: adhesively bonding plates to the compression faces to counterbalance the tension face plates and, hence, improve the beam sectional ductility; and to extend the tension face plates, in continuous beams, past the points of contraflexure so that they terminate in a compression face. In this paper, eleven new tests on 340 mm deep beams are presented that show that compression face plates are less prone to debonding than tension face plates. </jats:p>enJournal article002002179410.1260/1369433023209745902-s2.0-003686887059678Mohamed Sadakkathulla, M. [0000-0002-9164-8456]