Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/54819
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Appraising the methods accounting for 3D tunnelling effects in 2D plane strain FE analysis
Author: Karakus, M.
Citation: Tunnelling and Underground Space Technology, 2007; 22(1):47-56
Publisher: Pergamon-Elsevier Science Ltd
Issue Date: 2007
ISSN: 0886-7798
Statement of
Responsibility: 
M. Karakus
Abstract: Numerical analysis is widely used method in geotechnical engineering when calculating and predicting soil and rock behaviour under different loading and excavation conditions. For instance, simulation of tunnelling using 2D or 3D finite element (FE) analyses can often calculate any deformations and stress redistributions due to tunnelling operations without constructing real trial tunnels. Modelling the excavation process in 2D plane strain analysis, however, requires an approach that can consider 3D tunnelling effect as a result of volume loss. In addition, modelling shotcrete or similar support measures, using either beam elements, solid continuum elements or other special elements are needed to be adopted. Therefore, convergence-confinement, stiffness reduction, disk calculation and hypothetical modulus of elasticity (HME) soft lining approaches have been employed in the numerical analysis. Moreover, compatibility of each method with beam and solid continuum element models in 2D FE analysis was investigated. Thus, eight plane strain, non-linear FE analyses of tunnel construction in London Clay were performed and the results are presented and discussed in this article. © 2006 Elsevier Ltd. All rights reserved.
Keywords: Tunnelling
NATM
Small strain stiffness
HME
2D plane strain FE
DOI: 10.1016/j.tust.2006.01.004
Appears in Collections:Aurora harvest 5
Civil and Environmental Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.