Please use this identifier to cite or link to this item:
Scopus Web of Science® Altmetric
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPathmanathan, M.-
dc.contributor.authorSoong, W.L.-
dc.contributor.authorErtugrul, N.-
dc.identifier.citationIEEE Transactions on Industry Applications, 2012; 48(5):1443-1451-
dc.description.abstractSurface permanent-magnet (SPM) machines are normally operated by controlling the d- and q-axis currents. This paper examines the control of SPM generators based on controlling the terminal voltage magnitude V and power-factor angle 8. This is well suited for generator operation when using a switched-mode rectifier and avoids the need for a rotor position sensor. The parameters required for generating a given value of torque with minimum phase current in order to minimize copper losses are derived in this paper. This will be achieved by controlling V and 8 to keep the d-axis current equal to zero at low speed, before switching to field-weakening control at higher speeds. Simulated and experimental results will be used to verify the control strategy and the efficiency achieved.-
dc.description.statementofresponsibilityMehanathan Pathmanathan, Wen L. Soong and Nesimi Ertugrul-
dc.rights© 2012 IEEE-
dc.subjectAC–DC power conversion-
dc.subjectpermanent-magnet generators-
dc.subjectpulsewidth-modulated power converters-
dc.titleMaximum-torque-per-ampere control of phase advance modulation of an SPM wind generator-
dc.typeJournal article-
dc.identifier.orcidSoong, W.L. [0000-0003-0734-7608]-
dc.identifier.orcidErtugrul, N. [0000-0002-5592-5268]-
Appears in Collections:Aurora harvest 3
Electrical and Electronic Engineering publications

Files in This Item:
There are no files associated with this item.

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.