Nanocomposite bilayer film for resisting wear and corrosion damage of a Ti-6Al-4V alloy
Date
2012
Authors
Xu, J.
Liu, L.
Xie, Z.
Munroe, P.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Surface and Coatings Technology, 2012; 206(19-20):4156-4165
Statement of Responsibility
Jiang Xu, Linlin Liu, Zong-Han Xie, Paul Munroe
Conference Name
Abstract
A nanocomposite NiSi <inf>2</inf>/Ti <inf>5</inf>Si <inf>3</inf> bilayer film was engineered onto Ti-6Al-4V alloy by double cathode glow discharge. The outer layer of the resulting film comprised of NiSi <inf>2</inf>, having dense and fine-grained (35nm in size) columnar structure with a fraction of nanoscale twin bundles, and the inner layer consisted of equiaxed Ti <inf>5</inf>Si <inf>3</inf>with a grain size of 50nm. Nanoindentation was carried out on polished cross-sections to measure the elastic modulus and hardness of each layer of the as-deposited film. Scratch tests were undertaken to evaluate the resistance of the as-deposited film to both abrasive and adhesive damage. The dry sliding wear experiments were conducted against ZrO <inf>2</inf> ceramic balls under the applied load ranging from 3.3N to 4.8N at room temperature and 500°C using a ball-on-disc tribometer. Compared with the Ti-6Al-4V alloy, the specific wear rates of the alloy coated with the bilayer film decreased by one order of magnitude at room temperature and were further reduced by one order of magnitude at 500°C. The electrochemical behavior of the coated alloy was characterized by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) in 5wt.% HCl solution. The results revealed that nanocomposite NiSi <inf>2</inf>/Ti <inf>5</inf>Si <inf>3</inf> bilayer film exhibited a higher corrosion resistance than the Ti-6Al-4V alloy. © 2012.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright © 2012 Published by Elsevier B.V.