Deflectors as the performance booster component in designing a side-ventilated heat pump cabinet dryer for vegetables

dc.contributor.authorMecha, P.
dc.contributor.authorYali, F.
dc.contributor.authorAwuah, E.
dc.contributor.authorAdele Odero, J.
dc.contributor.authorZhang, J.
dc.contributor.authorKunjie, C.
dc.date.issued2023
dc.description.abstractUnbalanced drying air and temperature distribution in a dryer is among the major cause of non-uniformity in moisture content of dried food. Thus, the distribution of air and temperature in corner-ended, corner-ended with deflector, curved-ended, and curved-ended with defectors were investigated. Velocities used were 2 m/s, 4 m/s, and 6 m/s while temperatures ranged from 40-60°C. The design with lowest deviations in simulated and actual drying parameters was fabricated to dry mushrooms. Results showed that adding deflectors improved drying air and temperature distribution. The corner-ended with deflector dryer configuration was superior to other designs, with 6 m/s and 60°C being optimal. A mass transfer simulation of the corner-ended with deflectors configuration had moisture evaporate from 1.00-0.11 in 2000 seconds. A comparison of moisture ratios in the two dryers gave R² = 0.9965, which was acceptable. Drying at 55-60°C gave the best Lentinan content and rehydration ratio for mushrooms.
dc.identifier.citationThermal Science, 2023; 27(6B):4989-5004
dc.identifier.doi10.2298/TSC230305130M
dc.identifier.issn0354-9836
dc.identifier.urihttps://hdl.handle.net/11541.2/40646
dc.language.isoen
dc.publisherSerbian Society of Heat Transfer Engineers
dc.relation.fundingJiangsu Special Fund for Innovation and Extension of Agricultural Science and Technology NJ2019-15
dc.rightsCopyright 2023 Society of Thermal Engineers of Serbia Published by the Vinča Institute of Nuclear Sciences, Belgrade, Serbia. This is an open access article distributed under the CC BY-NC-ND 4.0 terms and conditions. (https://creativecommons.org/licenses/by-nc-nd/4.0/)
dc.source.urihttps://doiserbia.nb.rs/Article.aspx?id=0354-98362300130M
dc.subjectCFD simulation
dc.subjectheat pump
dc.subjectLentinan
dc.subjectmushroom drying
dc.subjectrehydration ratio
dc.subjecttwin-cabinet dryer
dc.titleDeflectors as the performance booster component in designing a side-ventilated heat pump cabinet dryer for vegetables
dc.typeJournal article
pubs.publication-statusPublished
ror.mmsid9916915829501831

Files

Collections