Predicted versus experimental out-of-plane force-displacement behaviour of unreinforced masonry walls

Simple item page
dc.contributor.authorWalsh, K.
dc.contributor.authorDizhur, D.
dc.contributor.authorGiongo, I.
dc.contributor.authorDerakhshan, H.
dc.contributor.authorIngham, J.
dc.date.issued2018
dc.description.abstractRecognising that in situ conditions for URM walls rarely reflect the idealised conditions assumed in analytical predictive models, nineteen unreinforced masonry (URM) walls in six different buildings were physically tested in situ to establish their out-of-plane (OOP) force-displacement behaviour, and the measured results were compared to the forecasted results obtained from established predictive methods. The considered wall configurations represented a variety of geometries, boundary conditions, pre-test damage states, and material properties. The average ratio and associated coefficient of variation (CV) of predicted strengths to measured strengths were determined to be 0.84 (CV 0.56) and 0.93 (CV 0.25) for the “unbounded” and “bounded” wall conditions, respectively, where the latter group represents walls used to infill frames. Use of the existing predictive methods resulted in over-prediction of the measured displacement parameters, which was likely due to most of the predictive methods being based on historical walls tests in one-way spanning conditions and without rigid bounding restraints capable of effectuating arching action in the wall, in contrast to many of the wall test conditions employed in the current study.
dc.description.statementofresponsibilityKevin Walsh, Dmytro Dizhur, Ivan Giongo, Hossein Derakhshan, Jason Ingham
dc.identifier.citationStructures, 2018; 15:292-306
dc.identifier.doi10.1016/j.istruc.2018.07.012
dc.identifier.issn2352-0124
dc.identifier.issn2352-0124
dc.identifier.orcidDerakhshan, H. [0000-0003-1859-4700]
dc.identifier.urihttp://hdl.handle.net/2440/121788
dc.language.isoen
dc.publisherElsevier
dc.rights© 2018 Institution of Structural Engineers. Published by Elsevier Ltd. All rights reserved.
dc.source.urihttps://doi.org/10.1016/j.istruc.2018.07.012
dc.subjectUnreinforced masonry (URM); earthquakes; out-of-plane; infill walls; airbag proof-testing; analytical methods
dc.titlePredicted versus experimental out-of-plane force-displacement behaviour of unreinforced masonry walls
dc.typeJournal article
pubs.publication-statusPublished

Files

Collections

Civil and Environmental Engineering publications