Evaluation of precision time synchronisation methods for substation applications
Date
2012
Authors
Ingram, D.M.E.
Schaub, P.
Campbell, D.A.
Taylor, R.R.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Conference paper
Citation
2012 International IEEE Symposium on Precision Clock Synchronization for Measurement Control and Communication (ISPCS) proceedings, 2012, pp.37-42
Statement of Responsibility
Conference Name
2012 International IEEE Symposium on Precision Clock Synchronization for Measurement Control and Communication (ISPCS) (24 Sep 2012 - 28 Sep 2012 : San Francisco, US)
Abstract
Many substation applications require accurate time-stamping. The performance of systems such as Network Time Protocol (NTP), IRIG-B and one pulse per second (1-PPS) have been sufficient to date. However, new applications, including IEC 61850-9-2 process bus and phasor measurement, require accuracy of one microsecond or better. Furthermore, process bus applications are taking time synchronisation out into high voltage switchyards where cable lengths may have an impact on timing accuracy. IEEE Std 1588, Precision Time Protocol (PTP), is the means preferred by the smart grid standardisation roadmaps (from both the IEC and US National Institute of Standards and Technology) of achieving this higher level of performance, and integrates well into Ethernet based substation automation systems. Significant benefits of PTP include automatic path length compensation, support for redundant time sources and the cabling efficiency of a shared network. This paper benchmarks the performance of established IRIG-B and 1-PPS synchronisation methods over a range of path lengths representative of a transmission substation. The performance of PTP using the same distribution system is then evaluated and compared to the existing methods to determine if the performance justifies the additional complexity. Experimental results show that a PTP timing system maintains the synchronising performance of 1-PPS and IRIG-B timing systems, when using the same fibre optic cables, and further meets the needs of process buses in large substations
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright 2012 IEEE