Anisotropic forward modelling of fluid injection and phase angles exceeding 90o in magnetotellurics
Files
(Title page, abstract & contents)
(Whole thesis (as available))
Date
2012
Authors
Macfarlane, J. E.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Thesis
Citation
Statement of Responsibility
Conference Name
Abstract
Electrical anisotropy, defined as the directional dependence of electrical conductivity within a medium, causes changes in the electromagnetic signal measured by magnetotellurics (MT) and as such is an important property to consider when interpreting MT data. This study concentrates on replicating the MT response measured at two distinctively different geological settings using a series of 2 dimensional anisotropic forward models. Results presented in this study show that 2-dimensional anisotropic forward modelling is able to account for subtle differences in subsurface anisotropic resistivity structures. Specifically, 2-dimensional anisotropic forward modelling is able to reproduce the measured difference in MT response between pre- and post fluid injection conditions at the Paralana Geothermal System using an anisotropic fluid volume. A second application in constraining the source of the anomalous phase angles exceeding 90o observed in MT measurements of the Capricorn Orogen, shows that 2-dimensional anisotropic MT models are not able to produce phase angles exceeding 90o in the MT data which has its electric field orientated perpendicular to the geoelectric strike. These findings provide a case supporting the use of 2-dimensional anisotropic forward modelling as a means of modelling changes caused by the flow of a fluid through the crust. In addition, they also highlight issues associated with its application to complicated structures perpendicular to the strike of the profile.
School/Discipline
School of Earth and Environmental Sciences
Dissertation Note
Thesis (B.Sc.(Hons)) -- University of Adelaide, School of Earth and Environmental Sciences, 2012
Provenance
This electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses.
Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the author of this thesis and do not wish it to be made publicly available, or you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at: http://www.adelaide.edu.au/legals
Description
This item is only available electronically.