Developments in double-modulated terahertz differential time-domain spectroscopy.
Date
2010
Authors
Balakrishnan, Jegathisvaran
Editors
Advisors
Abbott, Derek
Fischer, Bernd Michael
Mickan, Samuel Peter
Fischer, Bernd Michael
Mickan, Samuel Peter
Journal Title
Journal ISSN
Volume Title
Type:
Thesis
Citation
Statement of Responsibility
Conference Name
Abstract
Recent years have seen a plethora of significant advances in terahertz (THz or T-ray) technology with the rapid development of the ultrafast femtosecond laser system. By definition, THz refers to an electromagnetic wave located between the microwave and infrared regions of the electromagnetic spectrum. Over the last two decades, there has been an enormous interest in improving the sensitivity of spectroscopicmeasurements on liquids in the terahertz regime. Liquid studies at terahertz frequencies (0.1 - 10 THz) allow analysis of chemical composition and provides a better understanding of the solvation dynamics of various types of liquids. This Thesis focusses on developing a novel spinning wheel device using a doublemodulated terahertz differential time-domain spectroscopy (double modulated THz-DTDS) scheme coupled with a simultaneous dual-waveform acquisition technique for increasing the sensitivity and repeatability of liquid studies. The spinning wheel device promises a rapid succession of measurements, requiring one mechanical delay scan for the sample and reference signals. The double-modulated THz-DTDS scheme with simultaneous dual-waveform acquisition was first introduced by Mickan et al. (2004). This Thesis builds upon this former work with a modification in the signal extraction technique. In this work, a step-bystep
systematic engineering approach has been employed for the development of the spinning wheel device. The Thesis is categorised into several parts leading to the development of the spinning wheel device. The first part provides a review on the historical development of the electromagnetic spectrum and a review of the state-of-the-art regarding THz generation and detection based on transient photoconductivity. Identifying an optimal polymer window material forms the second part of this Thesis. Here, a range of polymer materials are tested for low hygroscopicity and high transmission coefficient. The third part of the Thesis reviews various window cell geometries used in liquid spectroscopy measurements. A detailed data analysis technique is described for each geometry. The fourth part of the Thesis presents a prototype of the novel spinning wheel mechanism for THz material parameter extraction using the double-modulated THz-DTDS scheme. A proof-of-principle showing that the amplitude noise of a THz system decreases as a function of the spinning wheel modulation frequency is demonstrated. Preliminary experiments indicate the potential of this technique for achieving a better noise performance, which is of significance particularly for THz spectroscopy of polar liquids where the signal-to-noise ratios are typically low due to high absorption
coefficient. The initial demonstration of the spinning wheel technique leads to THz spectroscopy of liquids based on a fixed dual-thickness window geometry. Here, a rapid switching between two fixed liquid sample thicknesses is introduced.
School/Discipline
School of Electrical and Electronic Engineering
Dissertation Note
Thesis (Ph.D.) -- University of Adelaide, School of Electrical and Electronic Engineering, 2010
Provenance
Copyright material removed from digital thesis. See print copy in University of Adelaide Library for full text.