Enhancing the performance and environmental impact of alkali-activated binder-based composites containing graphene oxide and industrial by-products
Date
2021
Authors
Ho, V.D.
Gholampour, A.
Losic, D.
Ozbakkaloglu, T.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Construction and Building Materials, 2021; 284:122811-1-122811-13
Statement of Responsibility
Van Dac Ho, Aliakbar Gholampour, Dusan Losic, Togay Ozbakkaloglu
Conference Name
Abstract
The growing production of industrial by-products, such as fly ash (FA), ground granulated blast furnace slag (GGBS), and lead smelter slag (LSS), has resulted in significant negative impacts on the environment. Meanwhile, the high demand for ordinary Portland cement (OPC) and the over-exploitation of natural sand (NS) has also negatively impacted the ecosystem. The use of the mentioned industrial by-products to replace OPC and NS offers great potential for reducing the environmental impact of both the industrial wastes and conventional concrete. This study investigates the possible improvements to mechanical and durability properties of combined FA and GGBS-based alkali-activated binder (AAB) mortars prepared with NS and LSS sands through the addition of graphene oxide (GO). The results show that the increase of GGBS content in the binder of AAB composites (i.e. 20% and 50% GGBS) results in a significant increase in compressive and tensile strengths, and a decrease in drying shrinkage, flowability, and water absorption of the mortars. It is found that mortars with 0.05% and 0.1% GO additives provide better mechanical and durability properties than the control mortars. The study also shows that oxygen functional groups of GO sheets have been reduced in alkaline solution, and they were turned into the form of reduced graphene oxide (rGO) sheets with a higher wrinkling degree in their shapes. The better performance of AAB mortars containing GO additives is attributed to the improvement of the gel matrix formed through the combination of chemical and mechanical interactions between rGO sheets and the gel products. The outcomes of this study point to the great potential of the combined use of waste materials and GO additives to enhance the performance of AAB composites.
School/Discipline
Dissertation Note
Provenance
Description
Available online 11 March 2021
Access Status
Rights
© 2021 Published by Elsevier Ltd.