Microstructure FSS patterning to improve 5G microwave signals through low-e plastic windows
Files
(Published version)
Date
2023
Authors
Yunos, L.
Jane, M.L.
Murphy, P.
Zuber, K.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Results in Surfaces and Interfaces, 2023; 11(100113):1-19
Statement of Responsibility
Conference Name
Abstract
Low emissivity (low-e) windows are widely used in the architectural sector to block the infrared (IR) radiation from the Sun. The windows contain a multilayer nanoscale coating of metallic and dielectric layers. The metallic layer, which is responsible for the IR reflection, also attenuates the radio and microwave frequencies used for modern-day technologies such as Fifth Generation (5G) communications. As there is an ever-increasing demand for a reliable interior-to-exterior signal coverage, low-e windows should be transparent to such signals. A class of surface modification - Frequency Selective Surface (FSS) is the technique of choice to be applied on the thin metallic coating to transmit the wireless signal.
In this work, a thin silver (Ag) film – 10 nm thick was deposited by electron beam evaporation on polycarbonate substrates as an example low-e coating. Despite excellent IR blocking (64 %) and visible light transmittance (60 %), it also presented a high attenuation of 20 dB at 5G signal bands (72 – 82 GHz). FSS patterns of various geometries and sizes were applied via laser ablation and evaluated to provide the lowest attenuation. We demonstrated that the application of the hexagonal pattern provided largest improvement reducing the 5G attenuation value from 20 dB to 1 dB, without compromising the visible transmittance and having only a minor effect on IR reflection.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CCBY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)