Improved dewaterability of iron oxide dispersions : rhe role of polymeric flocculant Type, pH and shear
Date
2008
Authors
McGuire, M.J.
Addai Mensah, J.
Bremmell, K.E.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Asia-Pacific Journal of Chemical Engineering, 2008; 3(1):18-23
Statement of Responsibility
Conference Name
DOI
Abstract
<jats:title>Abstract</jats:title><jats:p>Substantial amounts of recyclable water are trapped in mineral waste tailings dams annually due to less than effective dewatering processes. To address this, a study has been conducted of the flocculation performance of four high molecular weight (>5 × 10<jats:sup>6</jats:sup> Da) polyacrylamides, non‐ionic homopolymer (PAM N), anionic carboxylate substituted copolymer (PAM A), anionic sulfonate substituted copolymer (PAM S), and cationic trimethyl amino ethyl substituted copolymer (PAM C), on the dewaterability of iron oxide suspensions as a function of pH. Significant polymer structure‐mediated and pH‐dependent trends were observed.</jats:p><jats:p>Upon flocculation with up to 500 g polymer/t solid, settling rates in the range of 3–100 m/h were observed, along with sediment solid loading in the range 35–40 wt%. Settling rates varied depending on polymeric flocculant type, and were higher for anionic and cationic polymers than for non‐ionic polymers. Settling was most efficient at and below the iso‐electric point (iep, pH 8.5). Polymer structure type did not have any noticeable impact on the extent of pulp consolidation. Moderate shear significantly improved the consolidation (55 wt% solid) of pre‐sedimented pulps. For the selection of a flocculant, a polymer that displayed an opposite charge to that of the particles appeared to provide improved flocculation and dewatering performance. Copyright © 2008 Curtin University of Technology and John Wiley & Sons, Ltd.</jats:p>
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright status unknown