Application of coolants during tool-based machining – A review

Simple item page
dc.contributor.authorZheng Yang, K.
dc.contributor.authorPramanik, A.
dc.contributor.authorBasak, A.K.
dc.contributor.authorDong, Y.
dc.contributor.authorPrakash, C.
dc.contributor.authorShankar, S.
dc.contributor.authorDixit, S.
dc.contributor.authorKumar, K.
dc.contributor.authorIvanovich Vatin, N.
dc.date.issued2023
dc.description.abstractCoolant is a substance that applied in a machining process for the efficient machining of materials. The application of coolants is based on the several factors including the types of machining process, workpiece material, cutting tool and cost. Coolant helps to dissipate the heat that can be generated during the machining operation, induce lubricating effects to decrease the friction caused by the interfaces of two surfaces, flush away chips and offer corrosion protection. With the right type of coolants used, the performance of machining applications and the attributes of workpieces can be remarkably enhanced. The objective of the study to provides a critical review on the mechanism of coolant penetration, functions, variety of coolants, cooling actions, effectiveness, applications, and the additives that alter the ability and properties of coolants. Furthermore, the critical review also addresses the new technology cryogenic machining that uses cryogenic gases as coolants instead of conventional coolants.
dc.description.statementofresponsibilityKhor Zheng Yang, A. Pramanik, A.K. Basak, Y. Dong, Chander Prakash, S. Shankar, Saurav Dixit, Kaushal Kumar, Nikolai Ivanovich Vatin
dc.identifier.citationAin Shams Engineering Journal, 2023; 14(1):101830-101830
dc.identifier.doi10.1016/j.asej.2022.101830
dc.identifier.issn2090-4479
dc.identifier.issn2090-4495
dc.identifier.orcidBasak, A.K. [0000-0003-2301-4758]
dc.identifier.urihttps://hdl.handle.net/2440/137787
dc.language.isoen
dc.publisherElsevier BV
dc.rights© 2022 The Authors. Published by Elsevier BV on behalf of Faculty of Engineering, Ain Shams University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/ by-nc-nd/4.0/).
dc.source.urihttps://doi.org/10.1016/j.asej.2022.101830
dc.subjectMachining; Coolants; Lubrication; Additives; Surface roughness; Tool wear
dc.titleApplication of coolants during tool-based machining – A review
dc.typeJournal article
pubs.publication-statusPublished

Files

Collections

Adelaide Microscopy publications