Optimization of accuracy and surface finish of drilled holes in 350 mild steel

Simple item page
dc.contributor.authorPramanik, A.
dc.contributor.authorBasak, A.K.
dc.contributor.authorIslam, M.N.
dc.contributor.authorDong, Y.
dc.contributor.authorDebnath, S.
dc.contributor.authorVora, J.J.
dc.contributor.editorGupta, K.
dc.contributor.editorGupta, M.K.
dc.date.issued2020
dc.description.abstractThis chapter presents analysis and optimization of machinability of Mild steel grade 350 while high speed drilling operation. Taguchi design of experiments (DoEs), analysis of variance (ANOVA) and other traditional methods were applied to optimize the input variables in order to minimise the circularity, cylindricity, diameter error and surface roughness of drilled holes. It was found that point angle was the highest contributor for the circularity, cylindricity and surface roughness of drilled holes. The circularity error was minimum at the low speed (584 rpm), low feed (0.15 mm/rev) and moderate point angle (125°). The cylindricity error of holes was minimised at the high speed (849 rpm), moderate feed (0.2 mm/rev) and moderate point angle (125°). The moderate speed, low feed and moderate point angle minimised surface roughness considerably. The interaction between speed and point angle had the maximum contribution to the diameter error of drilled holes. The diameter error was minimum at the moderate speed, low feed and moderate point angle.
dc.description.statementofresponsibilityA. Pramanik, A. K. Basak, M. N. Islam, Y. Dong, Sujan Debnath and Jay J. Vora
dc.identifier.citationOptimization of Manufacturing Processes, 2020 / Gupta, K., Gupta, M.K. (ed./s), Ch.3, pp.65-90
dc.identifier.doi10.1007/978-3-030-19638-7_3
dc.identifier.isbn3030196380
dc.identifier.isbn9783030196387
dc.identifier.orcidBasak, A.K. [0000-0003-2301-4758]
dc.identifier.urihttps://hdl.handle.net/2440/132163
dc.language.isoen
dc.publisherSpringer
dc.publisher.placeCham, Switzerland
dc.relation.ispartofseriesSpringer Series in Advanced Manufacturing
dc.rights© Springer Nature Switzerland AG 2020
dc.source.urihttps://link.springer.com/book/10.1007/978-3-030-19638-7
dc.subjectTechnology & Engineering
dc.titleOptimization of accuracy and surface finish of drilled holes in 350 mild steel
dc.typeBook chapter
pubs.publication-statusPublished

Files

Collections

Adelaide Microscopy publications