Dependence of MILD combustion on fuel-air injection pattern within a recuperative furnace
Date
2009
Authors
Craig, R.
Dally, B.
Mi, J.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Conference paper
Citation
Proceedings of the Australian Combustion Symposium, held in Brisbane, Australia, 2-4 December 2009: pp. 1-4
Statement of Responsibility
R.A. Craig, B.B. Dally, and J. Mi
Conference Name
Australian Combustion Symposium (2009 : Brisbane, Qld.)
Abstract
A MILD combustion furnace was used to examine the feasibility of both counterflow and co-flow firing of reactants: natural gas (91.4% CH4) and air. It was found that the stability of MILD combustion under the counterflow conditions is highly sensitive to the momentum ratio of fuel to air ejecting into the furnace and that the present furnace geometry does not lend itself to this flow configuration. For most of the counterflow conditions studied, the exhaust gasses contained unburned hydrocarbons as well as high levels of CO and H2, implying that fuel short circuiting was occurring inside the furnace. In contrast, the co-flow firing configurations, especially with premixing of the reactants, have proven to work extremely well. Very low emissions of CO, H2 and NOx were recorded for a variety of equivalence ratios and firing rates.
School/Discipline
Dissertation Note
Provenance
Description
Access Status
Rights
Copyright status unknown