3D-printed micro-axicon enables extended depth-of-focus intravascular optical coherence tomography in vivo
Files
(Published version)
Date
2025
Authors
Ruchka, P.
Kushwaha, A.
Marathe, J.A.
Xiang, L.
Chen, R.
Kirk, R.
Tan, J.T.M.
Bursill, C.A.
Verjans, J.
Thiele, S.
Editors
Advisors
Journal Title
Journal ISSN
Volume Title
Type:
Journal article
Citation
Advanced Photonics, 2025; 7(2):026003-1-026003-10
Statement of Responsibility
Pavel Ruchka, Alok Kushwaha, Jessica A. Marathe, Lei Xiang, Rouyan Chen, Rodney Kirk, Joanne T. M. Tan, Christina A. Bursill, Johan Verjans, Simon Thiele, Robert Fitridge, Robert A. McLaughlin, Peter J. Psaltis, Harald Giessen, and Jiawen Li
Conference Name
Abstract
A fundamental challenge in endoscopy is how to fabricate a small fiber-optic probe that can achieve comparable function to devices with large, complicated optics. To achieve high resolution over an extended depth of focus (DOF), the application of needle-like beams has been proposed. However, existing methods for miniaturized needle-beam designs fail to adequately correct astigmatism and other monochromatic aberrations, limiting the resolution of at least one axis. Here, we describe an approach to realize freeform beam-shaping endoscopic probes via two-photon polymerization three-dimensional (3D) printing. We present a design achieving <8μm lateral resolution with a DOF of ∼800μm. The probe has a diameter of <260μm (without the torque coil and catheters) and is fabricated using a single printing step directly on the optical fiber. The probe was successfully utilized for intravascular imaging in living diabetic swine at multiple time points, as well as human atherosclerotic plaques ex vivo. To the best of our knowledge, this is the first report of a 3D-printed micro-optic for in vivo imaging of the coronary arteries. These results are a substantial step to enable the clinical adoption of both 3D-printed micro-optics and beam-tailoring devices.
School/Discipline
Dissertation Note
Provenance
Description
Published online Mar. 3, 2025.
Access Status
Rights
© The Authors. Published by SPIE and CLP under a Creative Commons Attribution 4.0 International License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.